< Find A Product

SONESSE 40 3/30 ZIGBEE 3M WHITE CABLE WITH INLINE CONNECTOR - 1246314 - 1 - Somfy
SONESSE 40 3/30 ZIGBEE 3M WHITE CABLE WITH INLINE CONNECTOR - 1246314 - 1 - Somfy
SONESSE 40 3/30 ZIGBEE 3M WHITE CABLE WITH INLINE CONNECTOR - 1246314 - 2 - Somfy
SONESSE 40 3/30 ZIGBEE 3M WHITE CABLE WITH INLINE CONNECTOR - 1246314 - 3 - Somfy
Video

Ref : 1246314 - Sonesse2 40 Zigbee 3/30

SONESSE 40 3/30 ZIGBEE 3M WHITE CABLE WITH INLINE CONNECTOR

A smart, bi-directional, quiet, 40mm AC wired motor solution dedicated to a wide range of interior window coverings.

More about
Application
Interior blinds
Technology Warranty
Zigbee 5 Years

Product benefits

Convenience:

• Compatible with a wide range of interior window coverings.

Easy Installation:

• Seamless integration to match any décor:
• 8mm motor head thickness for reduced light gap.
• Recessed integrated motor head plate dependent on the bracket system.
• Available with either 3m open cable or with inline connector (for ease of pre-wiring).

Easy programming and adjustment with TaHoma® pro:

• Installation and programming performed directly from the app: including intuitive step-by-step programming instructions.
• LED feedback for easy troubleshooting and installation.
• Acts as a Zigbee® mesh network router to extend radio range.
• Dedicated after sales and remote maintenance tool, Serv-e-Go 

Reliability:

• Highly secure protocol
• Somfy Quality and Warranty

Other documents & links

Install

Others

Technical information

End product
End product type Tubular AC Motor with Zigbee technology  

Technology
Radio Frequency 2.4 GHz (Zigbee)   MHz
Range in house 7m (Extendable with Zigbee Repeaters)  

Electrical
Antenna External Antenna 17.5cm  
Consumption in standby mode 0.05   W
Consumption during operation 95   W
Rated current 0.413   A
Nominal Voltage / Frequency AC - 230V/50HZ  

Mechanical
Capacity of the limit switch unit 250   turns
Type of limit switch unit Electronic & bi-directional radio  
Type of head ROUND  
Nominal Speed 30   rpm
Nominal Torque 3   Nm

Standard
Approval RCM  
Protection Index IP 30 (Indoor use only)  
Insulation class II  

Cable
Plug in cable In-line Connector  
Cable type VVF  
Wire section 0.75   mm²
Color WHITE  
Wire Length 3m (includes approx 210mm pigtail)   m
Number of wires of the cable 2  

Dimension
Diameter 40   mm
Length (L1) 504   mm
Basic crown for tube diameter Tube Min Ø37   mm

Other
Information An in-line connector cable must be installed by a qualified electrician in accordance with industry standard AS/NZS3000. You must turn off power to this cable before you connect or disconnect this motor. Power may only be supplied to this cable once male & female connectors are correctly coupled. Failure to do so could compromise personal safety. In-line connector for indoor use only. When installing the in-line connector to comply with AS/NZS 60335:1:2020 you must order & use an in-line connector housing ref.9015865. Installation/use of an exposed in-line connector is a safety risk.  
Thermal time 4   mn
Noise level (according to Somfy measures) 42   dBA
Working temperature 0°C to 60   °C